The M1-kp2 lcd keypad displays Low Battery.
If it maintains a voltage above 12.2V during the test then the battery is OK, if not the Low Battery will display on the LCD keypad.
In my tests the battery measured fine with a Multimeter but this doesn't load the battery.
After the Battery test i was none the wiser, I replaced the Panel 12V 7.2 ah battery anyway and repeated the test but the display still showed Low Battery.
After a full 24 hr charge the Low Battery indicator disappeared
To Manually do a battery load test
1) Press the ELK key then enter your Master User Code
2) Press the UP arrow key to 8-System Settings
3) Press the RIGHT arrow key then Enter the Master User Code
4) Press 4 takes you to 84-System Test
5) Press the RIGHT arrow key to enter 1:Battery Test
6) Press the Right arrow key again to start the Battery Test
No comments:
Post a Comment