Microsoft Edge Browser Support For Dahua, Hikvision And More

Using Microsoft Edge in Internet Explorer Mode is the best option as Chrome is not always compatible.

First open Microsoft Edge then type the IP address of the camera in my case 192.168.0.204.

It came back with this error message:  http://192.168.0.204/notSupported.asp

You will need to enable Internet explorer mode in Microsoft Edge

Click on the "three dots" in the top right then scroll down till you find "Reload in Internet Explorer mode".

If you get the below dialog box, enable "Open this page in Compatibility view" and "Open this page in Internet Explorer Mode", then click "Manage" Do not click done, Yet.

Here is where you add all the cameras IP addresses click "Add"

As you can see, I have added quite a few cameras. you must include the Http://

If you need to get back to this page to add more cameras you only need to go the "three dots" in the top right, then go to "Settings" then "Default Browser."

Now log into your camera in my case it was http://192.168.0.204 and make sure you don't add the 

/notSupported.asp only http://192.168.0.204

Also, don't be tempted to click on the "Open in Microsoft Edge" otherwise you will undo all the work you've done, this message will only come up when you are viewing your cameras anyway.