Turn on the headset by pressing the little black button on top next to the volume up control. you may need to hold it down for 1 second a blue light should appear near the microphone if done correctly.
Place the unit into pairing mode by holding down the volume up & the talk button ( near the microphone) until you see it flash red & blue then let go.
while flashing red & blue place back into the charge bay. when it is seated properly you should see the charge yellow led com on. Then hold down the volume up & down buttons on the back of the base unit until the blue light on top of the base unit goes solid blue this may take some time bu don't let go. once it goes solid blue take the unit out of the base station cradle and press the talk button. Away you go all connected.
Some manuals have failed to place all the information when pairing especially if you are repairing the unit from a previous pair.
No comments:
Post a Comment