Letters Purchased from Plastics For Industry : http://plasticsforindustry.com.au/
PH: 9706 3988 Cut To Size
Looking back now I probably should have done MERRY XMAS instead of MERRY CHRISTMAS
Letters Mounted On the "C"Channel still has the protective Paper
Letters Mounted On the "C"Channel protective Paper Removed and LED strips attached
Led Lights purchased from
Tel: +86-755-29682086
Fax: +86-755-29682109
Skype: ql-sales09
E-mail: sales9@qlledlight.com
Website: www.qlleds.com
Led Strip
Waterproof,14.4W/m Led Strip Waterproof
F5050S30-C-12, it is Single-Side Glued with Silicone Glue
Even though each strip has glue, I have seen the move in heat so I have cable tied each one and drilled a small 5 mm hole to mount it all the way round. I did not remove the glue or the backing.
Convert 3 Pin XLR to Cat6 - 27 Channel DMX Controller
Here is my DMX Help Sheet : https://www.dropbox.com/s/yuin2eyiokoworm/DMX.xlsx?dl=0
Once you have set your DMX channel, set function 10 to On which is up, this will give you a test sequence. Place the dip switch back to off when ready to be controlled by your software.
If you are using vixen you can test each output by using their built in remote play function
You will need to run vixen first ready to play a sequence
First you will need to scan for the IP address your laptop is on
I use INET port scanner on my iPhone then type in the address into Safari this can also be done from a PC
Yes it is $4.99 but its the best app, Just works : https://itunes.apple.com/us/app/inet-pro-network-scanner/id305242949?mt=8
As you can see mine is 192.168.2.13
From windows browser type 192.168.2.13:9999
PC
From Safari or mobile browser type 192.168.2.13:9999 then Go if needed.
Mobile
DMX controller and power supply mounted in lunchbox (LED strip lights)
DMX controller and power supply mounted in lunchbox (12v from DMX to 240v SSRelay)
If you are having issues with the SSR (solid state relay) not turning off due to its leakage current you may find that the SSR you have may have an internal snubber circuit.
I have some christmas lights on a gate that operate off a 240v to 12 dc power supply, some of the led lights on the gate would remain on even when the SSR had no signal voltage this was due to relays leakage current.
By using a couple of .22uf mains caps I was able to get it switch off fully.
3 Pin XLR Pinouts
http://lozaelec.blogspot.com.au/2015/02/vixen-3-sequences-tim-files.html
Other Christmas Light websites
